DTF Ready to Press. This is a COLD PEEL transfer only. Shirt is not included. The gang sheet size is 22" wide and approximately 60" tall. You will get Adult size designs.
Our direct to film transfers can be used on 100% cotton, 100% polyester, cotton/poly blends, triblends, mesh, canvas, Lycra®, and spandex.
Note: Avoid using a Cricut Easy Press or a household iron, as these won't apply enough pressure. Instead, use a dedicated heat press for best results.
Pressing Instructions for Cotton :
Here's a guide to applying our transfers, to make sure your garment looks perfect every time!
1. Place your garment on the press, and place the transfer film onto the fabric with the image facing upwards.
2. Apply heavy pressure at 315°F for 15 seconds. You should see the imprint of the fibers in the design when it's finished. If you don't, increase the pressure.
3. Remove the film from the garment by starting at the corner with the thickest part of the design. Fine lines may lift, so be careful.
4. Cover the garment with parchment paper, or a Teflon sheet, and press for 5 seconds.
By following these simple steps, you can create high-quality and long-lasting prints to elevate your designs!
CONTACT US FOR HELP
Each heat-press is unique. We're sharing our own usage-based general instructions for our apparel business and press. If you require any help or need further info, feel free to drop us an email to "firstname.lastname@example.org"