Dancing Skeleton, Halloween, UV DTF Wrap, Ready To Apply, UV DTF Decal Transfer, No Heat Needed, Uv DTF for 16 oz Cup Wrap, Sticker for Wrap, Waterproof, Glass Cup, Cute Stickers, Gift Sticker Cup
Pickup available at Maya TX
Usually ready in 24 hours
These decals are ideal for decorating Libbey jars, glass beer cans, and snow globe tumblers (16oz).
UV-DTF adhesive wrap designed for 16oz Libbey Glass Cups (glass cup not included)
* Dimensions: 9.3 inches x 4.3 inches
Dimensions may vary slightly.
* Please be aware that colors may differ from the image mockup due to variations in screen monitors.
* These wraps are specifically tailored for 16oz Libbey glass cups; however, slight variations in measurements may occur with other brands.
* You can also apply it to hard and glossy surfaces such as laptops, phones, and boxes.
* Depending on the brand of glass cup used, minor adjustments or cutting of the wrap may be necessary.
* We regret to inform you that we do not offer returns or exchanges for any of our products.
Please exercise caution during the pressing process as we cannot be held responsible for incorrectly applied transfers.
* Kindly ensure that you adhere to the provided pressing instructions diligently.
Follow these simple steps to apply the decal to your surface:
Step 1: Clean and Prepare
Thoroughly wash your cup with soap and ensure it is completely dry. Avoid using alcohol as it may compromise the adhesive.
Step 2: Position and Firmly Attach
Position the cup on a firm, flat surface, then gradually peel off the backing while rolling the cup. Once the decal is on the cup, take your time to press it firmly onto the surface. Apply pressure for approximately 3-5 minutes with your palm, utilizing body heat to activate the UV DTF adhesive. This process facilitates easier peeling later on and minimizes the risk of decal lifting. Once applied, the transfer cannot be removed or readjusted.
Step 3: Remove the Backing
Carefully peel off the backing paper from the decal, ensuring it does not stretch or tear. If any part of the design lifts during peeling, gently press it back down before continuing.
Step 4: Smooth It Over
Using your fingers or palms, smooth out the decal starting from the center and moving outward.
Step 5: Allow Activation Time
Do not wash or use the finished project for 24-48 hours to allow the adhesive to strengthen on the glass or cup.
*Please note that we cannot be held responsible for incorrectly applied or damaged UV DTF transfers. No refunds or exchanges will be offered in such cases.