Custom Heat DTF Transfers, Ready to Press Prints, Ready to Press DTF Transfers
Application Guide:
Preparation: Preheat your garment for 15 seconds to eliminate any residual moisture.
Positioning: Place the transfer with the white side facing down and the image facing up.
Heat Application: Heat press at a steady 315°F for 15 seconds.
Cooling & Revealing: Allow the transfer to cool down before gently peeling off the backing.
Finishing Touch: Cover the design with parchment paper and press for an additional 8 seconds to ensure longevity. 🎨
Care Tips: For optimal longevity, remember to turn the garment inside out during washing. Use cold water, avoid bleach and fabric softeners, skip dry cleaning, and opt for a gentle tumble dry setting. 💦
Important Note: This listing is exclusively for the heat transfer; no garment is included.
Frequently Asked Questions
DTF (Direct-to-Film) transfers are a printing method that allows you to transfer designs onto various fabrics using a special film and adhesive powder. This process creates vibrant, durable prints on cotton, polyester, blends, and more.
To apply DTF transfers, preheat your heat press to 300°F (150°C). Place the transfer on your garment, cover with parchment paper, and press for 15 seconds with medium pressure. Allow to cool for 10 seconds, then peel the film while warm.
DTF transfers work on virtually all fabric types including cotton, polyester, cotton blends, canvas, denim, leather, and even some synthetic materials. They're perfect for t-shirts, hoodies, bags, and more.
When properly applied and cared for, DTF transfers can last 50+ washes. For best longevity, wash in cold water, turn garments inside out, and avoid bleach or fabric softeners.
While a heat press is recommended for best results, you can use a household iron in a pinch. Set to the highest heat setting (no steam), apply firm pressure for 15-20 seconds, and ensure even coverage across the entire design.